Cleaning And Care Of The Unit - Beurer HS 30 Mode D'emploi

Note
We recommend the following temperature settings:
> 100 °C to 140 °C:
- Fine, fragile, coloured or bleached hair
> 150 °C to 170 °C:
- Normal hair
> 180 °C to 200 °C:
- Strong and resistant hair
Note
• Automatic shutoff:
For your safety, the straightener shuts off automatically after 30 minutes. The heat ready indicator
[2] rapidly flashes approx. 5 minutes in advance to indicate this.
After use
> Turn the temperature wheel down to the display „ „. The straightener shuts off.
> Place the straightener on a non-combustible surface.
> Remove the plug from the socket after each use.
> Let the unit cool down.
> Do not wind the mains cable [6] around the unit!
> Store the unit in a dry place that is out of reach of children.
> The unit can be hung on a hook by the hanging eyelet [5].

7. Cleaning and care of the unit

Cleaning
Warning
• Always pull the mains plug out of the socket before cleaning the device. Risk of electric shock!
• Ensure that no water gets inside the device. Risk of electric shock!
• Do not clean the device with highly flammable liquids! Risk of fire!
Note
• Your device is maintenance-free.
• Protect the device from dust, dirt and humidity.
• Do not clean the device in a dishwasher.
• Do not use any aggressive, caustic, abrasive or corrosive cleaning products or hard brushes.
• The casing of the hair straightener and the hot plates may be cleaned with a soft cloth dampened
with warm water.
16