Cleaning And Maintaining The Device - Beurer HT 62 Mode D'emploi

After use
1. To switch off the curling tongs after use, press and hold the ON/OFF button [6] for three seconds. Make sure to deactivate the
keylock beforehand. To deactivate the button lock, press the On/Off button [6] for 2 seconds. The LOC symbol disappears
from the LED operating display [3]. "OFF" appears on the LED operating display [3]. The curling tongs are now switched off.
2. To cool down, place the curling tongs with the stand [8] on a stable, level and non-flammable surface or hold the curling
tongs in your hand. The stand [8] prevents the hot heating rod [2] from touching the surface.
3. After each use, pull the mains plug out of the socket.
4. Do not wind the mains cable [7] around the device!
5. Store the device in a dry place out of the reach of children.
6. The device can be hung on a hook using the hanging eyelet [11].

7. Cleaning and maintaining the device

Cleaning
Warning
• Always pull the mains plug out of the socket before cleaning the device. Risk of electric shock!
• Ensure that no water gets inside the device! Risk of electric shock!
• Do not clean the device with highly flammable liquids! Risk of fire!
Notes
• Your device is maintenance-free.
• Protect the device from dust, dirt and humidity.
• Do not clean the device in the dishwasher.
• Do not use any aggressive, caustic, abrasive or corrosive cleaning products or hard brushes.
• The device may be cleaned with a soft cloth dampened with warm water.
24