Cleaning And Care Of The Unit - Beurer ELLE HTE 40 Mode D'emploi

Selecting the blower level
The hot air styler has three blower levels which
you can select via the slide switch [5]:
Level Description
0 Off
Gentle airflow
Strong airflow
Shaping hair
• Select the desired temperature level on the
slide switch [4].

7. Cleaning and care of the unit

notes
• Your unit is maintenance-free.
• Protect the unit from dust, dirt and moisture.
Cleaning
Important
• Always remove the plug from the socket
before cleaning.
• Ensure that no water enters the inside of the
unit!
• Do not wash the unit in a dishwasher!
• Do not use any strong, sharp, abrasive, corro-
sive cleaning agents or hard brushes!
• Do not clean it with any highly flammable
liquids!
• The housing of the hot air styler and the
attachments can be cleaned with a soft cloth
that has been moistened with warm water.
• Before each use, use a brush to free the air
outlet [3] and the air intake filter [7] of lint, dust
and hair that have been sucked-in.
• If the round brush [1] and the thermal brush
[2] are very dirty, remove them from the hot
air styler and wash them thoroughly under
running water.
• Switch on the hot air styler by selecting the
desired blower level on the slide switch [5].
• Dry and/or style your hair as you wish.
• After each use/interruption, always set the hot
air styler slide switch to off [5] (position 0).
• Remove the plug from the socket after each
use.
• Let the unit cool down.
• Do not wind the mains cable around the unit!
• Store the unit in a dry place that is out of
reach of children.
• The unit can be hung on a hook by the han-
ging eyelet [9].
• Dry the round brush [1] and the thermal brush
[2] carefully after cleaning them!
• Refrain from using the attachments until they
are completely dry.
14