Device Description - Beurer HS 100 Mode D'emploi

3. DEVICE DESCRIPTION

The associated drawings are shown on page 3�
Coated hot plates
1
Ion outlet
2
LED display
3
ON/OFF button
4
Button lock button
5
4. USAGE
Risk of burns and fire!
The device becomes very hot� When the device is switched on,
it must only be held using the handle� Do not touch the coated
hot plates
1
plates �
1
1� Position yourself on a dry, non-conductive surface� Make sure
that your hands are dry!
2� Hair should be clean and free from styling products� The ex-
ception to this is special products designed to help straight-
en hair�
3� Comb your hair with a large-toothed comb to get rid of any
tangles�
4� Open the device using the plate locking system
5� Briefly hold down the ON/OFF button
device�
6� Use the temperature switch
ture� The current set temperature setting is shown in the LED
� Do not clamp objects between the coated hot
Temperature switch
6
Plate locking system
7
360° swivel joint with anti-
8
kink protection
Mains cable
9
to set your desired tempera-
6
16
�
7
to switch on the
4