Device Description; Usage - Beurer HS 50 Mode D'emploi

5. DEVICE DESCRIPTION

The associated drawings are shown on page 3.
Ceramic-keratin-coated hot
1
plates with tourmaline crystals
LED display
2
Button for increasing the
3
temperature (+)
On/off switch
4
Button for decreasing the
5
temperature (-)
Locking mechanism
6

6. USAGE

6.1 Please note the following before use
WARNING
Risk of burns and fire!
The device becomes very hot. When the device is switched on, it
must only be held using the handle. Do not touch the coated hot
plates . Do not clamp objects between the coated hot plates
1
IMPORTANT
• Untangle the mains cable
• Do not pull, twist or bend the mains cable
route it over/on sharp, pointed objects or hot surfaces.
• Do not jam the mains cable
The risk of electric shock is increased if the mains cable
damaged or tangled.
Mains cable
7
Anti-kink protection with
8
hanging eyelet
360° swivel joint
9
Handle
10
Keylock
11
if it is twisted.
7
in drawers or doors, for example.
7
19
and do not pull or
7
.
1
is
7