Reference; Troubleshooting (Dvd) - Samsung DVD-VR350 Manuel D'instructions

Reference

Troubleshooting (DVD)

If your product malfunctions, go through the check points below before contacting a Samsung authorized
service centre.
Problem
• Check whether the power cord is securely plugged into the power outlet.
No power.
• Did you press the
The input is displayed The DVD Recorder & VCR requires some time to initialise after it is turned on.
for a while when the If 'Quick Recording' function is set to on, the DVD Recorder & VCR will power on quickly,
power turns on. which enables you to immediately record a desired channel. (see page 33)
• Check whether the power cord is securely plugged into the power outlet.
Cannot record TV • Did you set the DVD Recorder & VCR programme settings correctly?
programmes. • Check the free space on your disc.
• Check the antenna cable is connected.
• Check the recording time, end time and current time settings again.
Timer recording does
• Recording will be canceled if the power is interrupted due to a power failure or other
not work properly.
• Check whether the disc is formatted. This product can record on formatted discs only.
Cannot record.
• Check whether your disc has a suffi cient free space.
I pressed the REC
button but there is no If a programme is copy protected, you cannot record it.
response.
Press the PROG (
the power is on, and then press the STANDBY/ON button.
I forgot the password
All settings including password will revert to factory settings.
for parental lock.
Do not use it if not absolutely required.
(Note that this function is available only when there is no disc inserted.)
• Check whether the disc is inserted correctly with the label facing up.
Cannot play the disc. • Check the regional code of your DVD disc.
• This DVD Recorder & VCR cannot playback some types of disc.
• Are you watching a programme in slow or skip mode?
No sound.
• Check the connections and initial settings.
• Check whether the disc is damaged.
• Check whether the disc is inserted correctly with the label facing up.
Explanation/Solution
/I button of your DVD Recorder & VCR.
reason during recording.
/ ) buttons of your DVD Recorder & VCR at the same time when
If you are playing a programme at a speed other than normal speed, sound is not
output. (except for forward search Playback (Fast 1) and you cannot also hear during
scanning MPEG4 in all mode.)
Clean up the disc, if necessary.
English - 80