Samsung DVD-VR350 Manuel D'instructions page 64

VCR - - > DVD
DVD-Recorder
DVD-RAM(VR)
No. Start End
01 00:02:20 00:03:22
Play
02 --:--:-- --:--:--
Copy
Delete
00:03:42
STOP
Copy All
MOVE OK RETURN EXIT
▌ To copy from VCR to DVD
Edit
√
1. With the unit in Stop mode, press the MENU button in stop mode.
√
2. Press the ▲▼ buttons to select Copy, then press the OK or ► button.
3. Press the ▲▼ buttons to select VCR -- > DVD, then press the OK or
► button.
4. You can use the ► II, I ◄ ◄ or ► ►I, ◄ ◄ or ► ► buttons to search for the
Start position.
Press the OK button at the start point.
5. You can use the ► II, I ◄ ◄ or ► ►I, ◄ ◄ or ► ► buttons to search for the
end position.
Press the OK button at the end point.
• A copylist will be generated.
Repeat the above steps to create the copylist.
• In VCR mode, the copylist cannot be saved.
6. Press the ▲▼ buttons to select desired copylist, then press the OK or
► button.
7. Press the ▲▼ buttons to select Copy, then press the OK or ► button.
• The VCR will fast forward, searching for a start position and then
automatically start a copy.
• It may not be match up with Start and End point exactly.
• If you want to copy all copylists, select Copy All.
Direct copy VCR to DVD
• Insert the VHS tape you want to copy.
• Insert Recordable DVD disc.
• Press DVD copy button on front panel or remote control. (TO DVD)
• To stop recording press the STOP button.
English - 64