Samsung DVD-VR350 Manuel D'instructions page 44

01 02 - - - - - - - -- N : 2
Marker
MOVE PLAY CLEAR RETURN
01 02 - - - - - - - -- N : 2
Marker
MOVE PLAY CLEAR RETURN
01 02 03 04 05 06 07 08 09 10 N : 10
Marker
01 02 03 04 05 06 07 08 09 N : 9
Marker
MOVE PLAY CLEAR RETURN
Using the Markers
▌ Setting Markers
1. Press the MARKER button during playback.
2. Press the OK button when the desired scene appears.
• The number 01 is displayed and the scene is memorized.
3. Press the ◄► button to move to the next position.
4. Press the OK button again when the desired scene appears.
• The number 02 is displayed and the scene is memorized.
• DVD-RAM or DVD-RW(VR Mode) discs have the Marker function
instead of the Bookmark function. The Marker function allows you to
mark up to 99 scenes. Since the scenes may be displayed as many
different pages, numbering is necessary. If a disc in use is encoded
with disc Protect, Markers cannot be set or delete.
Only playback is available.
▌ Playing back a Marker
1. Press the MARKER button during playback.
2. Press the ◄► buttons to select a marked scene.
3. Press the OK or ► ll button to start playing from the selected scene.
• If you press the NEXT SKIP (► ► l) button or the PREVIOUS SKIP
(l ◄ ◄) button in marker mode, When the next or current marked
point plays for shorter than three seconds, playback starts from the
previous marked point.
▌ Clearing a Marker
1. Press the MARKER button during playback.
2. Press the ◄► buttons to select a marked scene.
Press the CANCEL button to delete the selected mark.
• When a marker is cleared while DVD-RAM/DVD-RW(VR mode) is
playing, marker numbers will change. For example, if the 7th marker
is cleared after ten markers are registered, the marker numbers after
the eighth will automatically move ahead by one and the 8th marker
becomes the 7th.
English - 44
(VR mode)