Making A Timer Recording - Samsung DVD-VR350 Manuel D'instructions

DVD-Recorder
Programme
DVD-RAM(VR)
Title List
ShowView
Scheduled Record List
Playlist
ShowView Extended : Off
Disc Manager
Programme
Setup
Copy
MOVE OK RETURN EXIT
DVD-Recorder
Scheduled Record List
DVD-RAM(VR) Current Time 12:00
No. To Source Day Start End Speed V/P Edit
No. 01
To Source Day Start End Speed V/P
DVD PR 01 01 MON 12:00 14:00 SP Off
Available Time 00:48 SP
MOVE OK RETURN EXIT
2. Press the REC button.
3. While in Record mode, press the REC button again to activate One-
Touch Recording (OTR).
• Record length 0:30 appears on the On-Screen Display and the DVD
Recorder & VCR will record for exactly 30 minutes.
4. Continue pressing REC to add recording time in preset minute
increments up to 9 hours.
• The DVD Recorder & VCR stops recording automatically when the
time has elapsed.
▌ To stop recording
Press the STOP (■) button.
The message "Press STOP button once more to cancel Timer Record" is
displayed.
Press the STOP (■) button again.
The message "Updating the disc Information. Please wait for a moment"
is displayed.
■ The timer counter decreases by the minute from 9:00 to 0:00,
then the DVD Recorder & VCR stops recording.

Making a Timer Recording

1. Check the antenna cable is connected.
►
2. Check the remaining time of the disc.
►
►
3. Check the date and time are correct.
Make sure the Clock (Setup-Clock Set) must be set before you
proceed with a timer recording.
(See page 23)
1. Press the OPEN/CLOSE button, and place a recordable disc on the
disc tray.
2. Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
3. With the unit in Stop mode, press the MENU button.
4. Press the ▲▼ buttons to select Programme, then press the OK or ► button.
You can go to this step directly by pressing the TIMER REC button.
5. Press the ▲▼ buttons to select the Scheduled Record List, then
press the OK or ► button twice.
• The Timer Recording screen is displayed.
6. Fill in the items using the ▲▼◄► buttons.
◄►: Moves to the previous/next item,
▲▼: Sets a value.
• To : Select the media to record DVD or VCR.
• Source : The video input source (AV1, AV2 or AV3), or the broadcasting
channel you want to make a timer recording from.
• Day : Set the recording day.
Daily, MO-SA, MO-FR, W-SA, ...W-SU,
01MON, ...31WED
• Start/End Time : Start and end time of the timer recording.
English - 56
DVD-VR355 only