Samsung DVD-VR350 Manuel D'instructions page 62

RAM VCR
STOP STOP
00:00:00 00:00:00
SP SP
Rem 00:48 Rem 01:21
PR 1 PR 1
JAN 01 2007 MON 12 : 00
Check Remaining Time
1. Press INFO button on the remote control.
The following information will be displayed.
(Current deck status, recording speed, remaining time, input channel,
current time.)
Special Recording Features
While a recording is in progress, you can watch a different media,
or add recording time in preset increments.
1. Watch a Different Channel
When you are watching through the Antenna input during recording,
press the TV/VCR button on the remote control to change to the
programme you want to watch.
When you the watching through the AV input during recording, change
the input of your TV from AV to Antenna. Change to the programme
you want to watch.
2. Watch a different media during recording
You can watch a DVD during VCR recording or watch a Video tape
during DVD recording.
• During VCR recording, insert a DVD in the DVD deck. The output will
automatically change to the DVD and start playback.
• During DVD recording, insert a Video tape in the VCR deck. The
output will automatically change to the VCR and start playback. (Only
if tape is missing the safety tab)
3. Add Recording Time
Refer to the One-Touch Recording (OTR).
(See pages 55~56)
4. Recording DVD and VCR at the same time
You can record DVD and VCR at the same time, but both modes must
be set up to record separately.
• Press the DVD/VCR button to set the unit to DVD or VCR mode.
• Choose input mode Tuner, AV1, AV2, AV3 or DV input. for DVD or
VCR.
• Choose REC SPEED mode for DVD or VCR.
• Press REC button for DVD or VCR.
■ When the DVD Recorder & VCR is connected to your TV using
the S-Video or component video cable, the playback screen on
the video tape will not display during DVD recording.
■ You cannot record different channels at the same time.
■ The DVD and VCR cannot start recording at the exact same time.
You must set one to start recording, then the other.
English - 62