Accessories; Preparing The Remote Control - Samsung DVD-VR350 Manuel D'instructions

▌ Step 4 : Playing
You can select the title you want to play in a displayed
menu and then immediately start playback.
A DVD consists of sections called titles, and sub sections
called chapters.
During recording, a title is created between two points
where you start and stop recording.
Chapters will be created automatically when you fi nalise
recording on DVD-RW/-R discs in V mode.
You can make your own chapters on DVD+RWs and edit
them using the Chapter Edit menu.
The chapter's length (interval between chapters) varies
according to the recording mode.
▌ Step 5 : Editing a recorded disc
Editing on discs is easier than conventional video tapes.
The recorder supports many different edit functions,
possible only with DVDs. With a simple and easy edit
menu, you can operate various edit functions, such as
delete, copy, rename, lock, etc., on a recorded title.
Creating a playlist (DVD-RAM/-RW in VR mode)
With this recorder, you can create a new playlist on the
same disc and edit it without the change of the original
recording.
▌ Step 6 : Finalising & Playing on other DVD components
To play your DVD on other DVD components, fi nalising
may be necessary. First, fi nish all editing and recording
operations, then fi nalise the disc.
When using a DVD-RW disc in VR Mode
Although fi nalising is generally unnecessary when playing
the disc on a VR Mode compatible component, a fi nalised
disc should be used for playback.
When using a DVD-RW disc in V mode
The disc should be fi nalised fi rst to enable playback
on anything other than this recorder. No more editing
or recording can be made on the disc once it has been
fi nalised.
When using a DVD±R disc
You should fi nalise the disc to play it on a component
other than this recorder. You cannot edit or record on the
disc once it has been fi nalised.
■ You can fi nalise discs automatically using EZ
REC MODE. (see page 60)
Unpacking
▌

Accessories

• Audio/Video Cable
• RF Cable for TV Control
• Remote control.
• Batteries for Remote Control (AAA Size)
• User's Manual
• Quick Guide
▌

Preparing the Remote Control

Install Batteries in the Remote Control
• Open the battery cover on the back of the remote
control.
• Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
• Replace the battery cover.
If the remote control does not operate properly:
• Check the polarity +/- of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if the remote sensor is blocked by obstacles.
• Check if there is any fl uorescent lighting nearby.
Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
English - 10