Samsung DVD-VR350 Manuel D'instructions page 34

1/1
JAN/01/2007 JAN/01/2007
09:41 PR1 09:45 PR1
JAN/01/2007
JAN/01/2007
09:50 PR1
12:00 PR1
JAN/01/2007
JAN/01/2007
12:30 PR1 12:40 PR1
Previous Top Next
CHAPTER
1/1
1 2
Previous Top Next
DVD-Recorder
System
No Disc
Programme
VCR
DVD EP Mode Time : 6 Hours
Setup
Chapter Creator : Off
Quick Recording : On
Off
On
MOVE OK RETURN EXIT
DVD-Recorder
System
No Disc
Programme
VCR
DVD EP Mode Time : 6 Hours
Setup
Chapter Creator : Off
Quick Recording : Off
Anynet+(HDMI-CEC)Off Off
On
MOVE OK RETURN EXIT
9. Press the STOP button to stop recording.
10. To display the created titles, fi nalise the disc (See page 77) and then
press the TITLE MENU button. The title menu will be displayed.
11. To display the created chapters, select the desired Title and then
press the DISC MENU button. The chapter menu for the selected
Title will be displayed.
■ On DVD-RW discs, additional chapters and titles can be added
to a fi nalised disc by unfi nalising and recording again. On DVD-R
discs, once fi nalised, no additional chapters or titles can be
recorded.
■ The Automatic Chapter Creator function does not work during
Timer Recording or when you turn the power off.
3
■ The DVD-R disc cannot be unfi nalised.
Quick Recording
If this function is set to on, the DVD Recorder & VCR will power on
quickly, which enables you to immediatedly record a desired channel.
►
►
1. With the unit in Stop mode/No Disc mode, press the MENU button.
►
√
2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.
3. Press the ▲▼ buttons to select System, then press the OK or ► button.
4. Press the ▲▼ buttons to select Quick Recording, then press the OK
or ► button.
5. Press the ▲▼ buttons to select On, then press the OK or ► button.
■ The Quick Recording is set to Off as default.
■ If this function is set to on, power consumption will be increased
when the unit is powered off.
Anynet+(HDMI-CEC) (DVD-VR355 only)
Anynet+ is a function that can be used to operate the recorder using a
Samsung TV remote control, by connecting the DVD Recorder & VCR to
a SAMSUNG TV using an HDMI Cable. (see pages 19~20) (This is only
►
►
available with SAMSUNG TVs that support Anynet+.)
►
►
►
1. With the unit in Stop mode/No Disc mode, press the MENU button on
the remote control.
2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.
3. Press the ▲▼ buttons to select System, then press the OK or ► button.
The system menu will be displayed.
4. Press the ▲▼ buttons to select Anynet+(HDMI-CEC), then press the
OK or ► button.
Anynet+(HDMI-CEC) items will be displayed.
5. Press the ▲▼ buttons to select On, then press the OK or ► button.
English - 34