Samsung DVD-VR350 Manuel D'instructions page 35

DVDR
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver : Off
Setup
Move Ok
Exit
TV Menu
For using Anynet+(HDMI-CEC)
1. Connect DVD Recorder & VCR to the TV by using HDMI cable. (See
pages 19~20)
2. Set the Anynet+(HDMI-CEC) to "On" on your DVD Recorder & VCR.
(see above)
3. Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
• You can operate the DVD Recorder & VCR by using TV remote control.
(TV buttons that can be used to control the DVD Recorder & VCR :
, , , , and
• When you press Anynet+ button on the TV remote control, the OSD to the
left will appear.
- Select Device: Use this option to select device.
- Record: Use this option to start recording or stop recording.
- Menu on Device : Same as MENU button (
VCR remote control.
- Device Operation : Same as ANYKEY button (
& VCR remote control.
■ By pressing the PLAY button of the recorder while watching TV,
the TV screen will change to the play screen.
■ If you play a DVD when the TV power is off, the TV will power On.
■ If you turn the TV off, the DVD Recorder & VCR will power off
automatically.(When the DVD recorder & VCR is recording, it
can't be powered off.)
■ If you change the HDMI to other sources(Composite, Component,
RF... etc) in TV while playing the DVD disc, the DVD Recorder
& VCR will stop playing. The DVD Recorder & VCR may keep
playing certain discs based on their content.
English - 35
, buttons,
~ button)
) on the DVD Recorder &
) on the DVD Recorder
, ,