Reference; Firmware Upgrade; Upgrade Procedure - Samsung DVD-H1080 Manuel D'utilisation

reference

Firmware upgrade

Introduction
Upgrading the Firmware will keep your DVD player
up to date.
The latest firmware version for this unit is
provided on the Samsung Website.(www.
samsung.com).
How to make an upgrade disc
You must burn the latest firmware version onto a
blank CD-R or CD-RW disc:
1. You have to download a new file through
Samsung's Download Center.
(www.samsung.com).
2. Write the file to Disc using the CD-RW drive of
your computer.
note
The CD should be burned following specs
below.
- File System CD-ROM ISO Level.
- Character set ISO 9660.
- The burned CD has to be Finalized.
- Please burn the CD at a low speed.

Upgrade procedure

1. Open the disc tray of your DVD-Player.
Place the burned disc on the tray. Close the
tray.
The Firmware upgrade screen will appear.
Upgrade file detected
Curent version: 07.01.03.08.H1080XAA
Update version: 07.02.03.09.H1080XAA
Upgrade ?
Press Play to start
Firmware upgrade
menu appears
_ reference
All manuals and user guides at all-guides.com
2. Press the enter or PLaY to start upgrade.
- Press any other button on the remote
control or eject the disc to cancel the
upgrade.
Upgrade file detected
Curent version: 07.12.15.00
Upgrade ?
Press Play to start
File copying
Firmware upgrade starts Firmware upgrade starts
Upgrade file detected
Curent version: 07.12.15.00
Upgrade ?
Press Play to start
Upgrade
Firmware upgrade starts Firmware upgrade starts
- During the firmware upgrade process, the
tray will open.
Please remove the disc and wait for about
2 minutes.
- If the DVD player was successfully updated,
the disc tray will close and the unit will turn
off and on.
When the unit turns on, the Select Menu
Language screen will appear.
3. Press the buttons to select the desired
π/†
language, and then press the enter button.
Select Menu Language
English
Français
Deutsch
Español
Italiano
Nederlands
note
- If the "Select Menu Language" doesn't
appear, please contact Samsung Customer
Service. (see page 64)
- Do not press any button or unplug the
power cord during the upgrade.
- The upgrade procedure may change, refer
to the web site (www.samsung.com).
- When software is upgraded, video and
audio settings you have made will return to
their default (factory) settings. We
recommend you write down your settings
so that you can easily reset them after the
upgrade.