Spare Parts And Accessories - Stihl HSA 56 Notice D'emploi

17 Specifications
17 Specifications
17.1 STIHL HSA 56 Hedge Trimmer
– Approved battery: STIHL AK
– Weight without battery: 2.9 kg
17.2 Cutting Blades
– Tooth spacing: 30 mm
– Cutting length: 450 mm
– Sharpening angle: 35°
17.3 STIHL AK Battery
– Battery technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating plate
– Energy content in Wh: see rating plate
– Weight in kg: see rating plate
– Permissible temperature range: -10°C to +50°C
17.4 STIHL AL 101 Charger
– Rated voltage: see rating label
– Frequency: see rating label
– Power rating: 75 W
– Charge current: 1.5 A
– Permissible temperature range for operation and storage:
+5°C to +40°C
For charging times see www.stihl.com/charging-times.
0458-714-9621-B
All manuals and user guides at all-guides.com
17.5 Noise and Vibration Data
The vibration values quoted above have been measured
according to a standardized test procedure and may be used
to compare electric power tools. Depending on the type of
usage, the vibrations that actually occur may differ from the
values quoted. The vibration values quoted may be used for
an initial assessment of the user's exposure to vibrations.
The actual exposure to vibrations has to be estimated. This
process may also take into account times during which the
electric power tool is switched off and times during which it
is switched on but running without load.
K-value for noise pressure level and noise power level is 2.5
dB(A). K-value for vibration level is 2.0 m/s².
– Sound pressure level L
– Sound power level L
STIHL recommends that you wear hearing protection.
– Vibration measurement a
17.6 REACH
REACH is an EC regulation and stands for the Registration,
Evaluation, Authorisation and Restriction of Chemical
substances.
For information on compliance with the REACH regulation
see www.stihl.com/reach.

18 Spare Parts and Accessories

18.1 Spare Parts and Accessories
measured according to
p
EN 60745-2-15: 80 dB(A)
measured according to EN 60745-
w
2-15: 91 dB(A)
measured according to
h
EN 60745-2-15
– Control handle: < 2.7 m/s²
– Loop handle: < 1.2 m/s²
These symbols identify original STIHL
replacement parts and original STIHL
accessories.
English
49