Safety And Protective Devices - AL-KO solo 132 Traduction De La Notice D'utilisation Originale

Product description
2.6

Safety and protective devices

WARNING!
Risk of injury
Defective and disabled
safety and protective de-
vices can lead to serious
injury.
■
Have any defective
safety and protective
devices repaired.
■
Never disable safety
and protective devices.
Emergency stop
In an emergency, switch off the engine at the ON/
OFF switch.
Guard plate
Protects the operator from contact with the rotat-
ing blade or the cutting line and objects flying out.
"Bike" handle
Ensures that the feet of the operator do not get
into the vicinity of the rotating blade or the cutting
line.
2.7 Product overview (01)
No. Component
1 Blade or spool
2 Cutting head with bevel gear
3 Guard plate with:
■
4 Guard bar
■
5 Line cutter
6 Shaft with interior drive shaft
7 "Bike" handle
8 Combination handle with:
■
9 Locking switch
■
10 Throttle lever
■
11 Half throttle stop
■
12 On/Off switch for engine
2500126_a
No. Component
■
13 Throttle lever detent
14 Carrying belt
15 Engine block with:
■
16 Air filter housing
■
17 Air filter screw
■
18 Fuel tank
■
19 Cap of the fuel tank
■
20 Starter handle
■
21 Spark plug cover
■
22 Choke lever
■
23 Housing flange
■
24 Primer
2.8 Approved cutting tools
Only the OEM cutting tools listed here may be
used:
■
Spool, article no. 127235
■
4-toothed blade, article no. 127239
■
3-toothed blade, article no. 127240
DANGER!
Danger from cutting
tools!
Non-approved cutting tools
(e.g. multi-part metallic
cutting tools with revolving
chains and blades) and
damaged cutting tools
(e.g. cracks, spalling) can
result in very serious inju-
ries or even death.
■
Use only the approved
OEM cutting tools.
■
Replace damaged cut-
ting tools immediately.
39