Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. Vibration
Vibration force
Vibration frequency
6. Working surface
Working surface
7. Spec. surface pressure
Spec. surface pressure
8. Optional equipment
Water tank 5 l
9. Noise and Vibration data
The following noise and vibration data according to EC Machinery Directive in the version (2006/42/EC), was determined, taking into account the
following standards and directives. In operational use, values can deviate depending on the prevailing conditions.
1)
9.1 Noise data
The noise data specified in Appendix 1, sub-clause 1.7.4.u of the EC Machinery Directive is for:
the sound pressure level at the operator
place is L
PA
Measured sound power level L
Guaranted sound power level L
The noise values were determined, taking into account the following directives and standards:
Directive 2000/14/EC / EN ISO 3744 / EN 500-4
9.2 Vibration data
Hand/arm vibration values according to Appendix 1, sub-clause 3.6.3.1 of the EC Machinery Directive:
Total vibration value of the acceleration a
Uncertainty K
The acceleration value was determined, taking into account the following directives and standards:
EN 500-4 / DIN EN ISO 5349
1)
Since the permissible noise rating level of 85 dB(A) can be exceeded with this machine, the operator must wear suitable hearing protection.
WA,m
WA,g
hv
10.5 kN
100 Hz
0.11 m²
9.3 N/cm²
89 dB
100 dB
105 dB
11 m/s²
2
1.0 m/s
23
2. Technical Data
Publicité
Table des Matières
