Optional Equipment; Noise Data - Ammann AVP 1033 Mode D'emploi

4. Speed
Speed
5. Vibration
Vibration force
Vibration frequency
6. Working surface
Working surface
7. Spec. surface pressure
Spec. surface pressure

8. Optional equipment

Water tank 5 l
9. Noise and Vibration data
The following noise and vibration data according to EC Machinery Directive in the version (98/37/EC), was determined, taking into
account the following standards and directives.
In operational use, values can deviate depending on the prevailing conditions.
1)

9.1 Noise data

The noise data specified in Appendix 1, sub-clause 1.7.4.f of the EC Machinery Directive is for:
the sound pressure level at the
operator place is L
PA
Measured sound power level L
Guaranted sound power level L
The noise values were determined, taking into account the following directives and standards:
Directive 2000/14/EC / EN ISO 3744 / EN 500-4
9.2 Vibration data
Hand/arm vibration values according to Appendix 1, sub-clause 3.6.3.a of the EC Machinery Directive:
Weighted effective acceleration of
the upper limbs a is
hv
The acceleration value was determined, taking into account the following directives and standards:
EN 500-4 / ISO 2631-1 / DIN EN ISO 5349 / DIN EN ISO 8041 / VDI Directive 2057
1)
Since the permissible noise rating level of 85 dB(A) can be exceeded with this machine, the operator must wear suitable
hearing protection.
0.11 m²
9.3 N/cm²
WA,m
WA,g
max. 22 m/min
10.5 kN
100 Hz
89 dB
100 dB
105 dB
11.1 m/s²
23
2. Technical Data
0.136 m²
7.7 N/cm²