GreenWorks Pro CRZ426 Guide D'assemblage page 27

EN
Dis- Description
play
The left or right
blade does not
work.
The communication module of the
left blade controller is damaged.
The 30pin connector between the
vehicle wirie harness and the left
blade controller is loose.
The communication module of the
right blade controller is damaged
The 30pin connector between the
vehicle harness and the right blade
controller is loose.
The 10pin connector between the
vehicle wiring harness and the bat-
tery compartment is loose.
The 4pin connector between the
vehicle wiring harness and the seat
switch is loose.
Poor contact of seat switch contac-
tor.
A high-voltage battery pack is in-
serted in the of the battery com-
partment.
A high-voltage battery pack is in-
serted in the of the battery com-
partment.
The left blade motor fails.
The right blade motor fails.
The left mowing motor is overloa-
ded.
The machine is blocked with grass
and debris.
The blade hit a hard object.
The left mowing motor is overloa-
ded.
The machine is blocked with grass
and debris.
The blade hit a hard object.
English
Fault code on Cause
LCD
V 12 The left blade controller
fails.
The connector is loose.
V 13 The right blade controller
fails.
The connector is loose.
V21 The connector is loose.
V27 The connector is loose.
Seat switch fails.
ML11 Wrong battery pack ap-
plied.
MR11 Wrong battery pack ap-
plied.
ML13 The motor fails.
MR13 The motor fails.
ML14 The motor shut down for
protection.
MR14 The motor shut down for
protection.
26
Solution
Contact a speci-
fied service cen-
ter.
Contact a speci-
fied service cen-
ter.
Contact a speci-
fied service cen-
ter.
Contact a speci-
fied service cen-
ter.
Check the bat-
tery pack.
Check the bat-
tery pack.
Contact a speci-
fied service cen-
ter.
Contact a speci-
fied service cen-
ter.
Raise the deck
height and re-
duce drive
speed.
Clean the deck.
Restart the ma-
chine.
Raise the deck
height and re-
duce drive
speed.
Clean the deck.
Restart the ma-
chine.