JVC KD-G632 Manuel D'instructions page 28

Symptoms
• The iPod or D. player does not turn on or
does not work.
• The sound is distorted.
• "NO IPOD" or "NO DP" appears on the
display.
• Playback stops.
• No sound can be heard when connecting an
iPod nano.
• No sound can be heard.
• "ERROR 01" appears on the display when
connecting a D. player.
• "NO FILES" or "NO TRACK" appears on the
display.
• "RESET 1" – "RESET 7" appears on the
display.
• "RESET 8" appears on the display.
• The iPod's or D. player's controls do not work
after disconnecting from this unit.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
28
Remedies/Causes
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
Deactivate the equalizer either on the unit or the
iPod/D. player.
• Check the connecting cable and its connection.
• Charge the battery.
The headphones are disconnected during playback.
Restart the playback operation using the control panel
(see page 19).
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
Disconnect the adapter from the D. player. Then, connect
it again.
No tracks are stored. Import tracks to the iPod or D. player.
Disconnect the adapter from both the unit and iPod/
D. player. Then, connect it again.
Check the connection between the adapter and this unit.
Reset the iPod or D. player.