Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Connecting the water and electricity supplies
Connection to the water and electricity
supplies should only be performed by a
qualified technician.
The dishwasher should not stand on top of
the water hoses or the electricity supply cable
The appliance must be connected to the water
supply network using new piping. Do not use
old piping.
Connecting the water inlet hose
Connect the cold-water supply hose to a
threaded 3/4(inch) connector and make sure that
it is fastened tightly in place. If the water pipes
are new or have not been used for an extended
period of time, let the water run to make sure
GB-56
Publicité
