Publicité
Les langues disponibles
Les langues disponibles
If the appliance must be moved at any time,
keep it in an upright position; if absolutely
necessary, it may be tilted onto its back.
Positioning and leveling
1. Remove the appliance from all packaging and
check that it has not been damaged during
transportation. If it has been damaged,
contact the retailer and do not proceed and
further with the installation process.
2. Check the dishwasher by placing it so that
its sides or back panel are in contact with the
adjacent cabinets or even with the wall. This
appliance can also be recessed under a single
worktop .
3. Position the dishwasher on a level and sturdy
floor. If the floor is uneven, the front feet of
the appliance may be adjusted until it reaches
a horizontal position (the angle of inclination
must not exceed 2 degrees). If the appliance
is levelled correctly, it will be more stable and
much less likely to move or cause vibrations
and noise while it is operation.
ENGLISH
GB-55
Publicité
