Publicité
Les langues disponibles
Les langues disponibles
When the washing is over, you can shut off the
switch by pressing "Power» button.
Change the Programme.
Premise: A cycle that is underway can only be
modified if it has only been running for a short
time. Otherwise, the detergent may have already
been released, and the appliance may have
already drained the wash water. If this is the
case, the detergent dispenser must be refilled (see
the section entitled « Fill in the Detergent»).
Press «Power» button to cancel the programme,
and turn on it again ,then you can change the
programme to the desired cycle setting (see the
section entitled «Starting a wash cycle. . . »).
NOTE: If you open the door when washing, the
machine pauses and warning alarm rings, the
display appears E1. When you close the door,
the machine will keep on working .
The 6 programme lights show the state of the
dishwasher:
a. One of the programme lights on-> cycle
running
b. One of the programme lights blinking
->pause
ENGLISH
GB-43
Publicité
