Configuration - Hach Thermo Fisher TenSette plus Manuel De L'utilisateur

Adjust the trigger position
The index finger-operated trigger, which activates the piston movement, can be adjusted by rotating
it 60 degrees in both directions from the center position. Usually right-handed operators turn it left
(counter-clockwise) to get the best possible position for the thumb to eject the tip. Refer to
Figure 1 Adjust the trigger position
1 Trigger
Tip ejection
To help eliminate the risk of contamination, the pipette is fitted with a tip ejector system. The tip
ejector system consists of a soft-touch tip ejector with a specially designed gearing mechanism.
Refer to Figure 2 on page 7.
To release the tip, point the pipette at a suitable waste receptacle and press the tip ejector with your
thumb.
Shelf hanger
You can attach the pipette shelf hanger on a counter, pipette stand or anywhere where you want to
hang your pipette.
1. Clean the area where you plan to attach the shelf hanger.
2. Apply the two stickers to the underside of the shelf hanger.
3. Press the shelf hanger firmly into place—on a shelf, countertop or pipette stand.
4. Hang the grippy finger rest on the shelf hanger.

Configuration

Select the pipette functions and speed
1. Use the left selection key to select Menu to choose the pipetting function. Refer to
2. Use the right selection key to scroll the function list and select the function with OK.
3. Select one option.
Option Description
Pippete Forward technique. Refer to
RPipet Reverse and repetitive technique. Refer to
Stepper Multi-dispensing technique. Refer to
Dilute Dilution technique. Refer to
6 English
2 Trigger and finger rest adjustable
Pipette on page 8.
RPipet on page 8.
Stepper on page 9.
Dilute on page 9.
Figure 1.
Figure 2.