Product Overview - Toro Recycler 20995 Manuel De L'opérateur

Figure 10
3. Release the button on the lever and ensure that the
top of the lever is lies fully in the switch channel
(Figure 11). If the top of the lever is not in the
switch channel, your machine will not start.
Figure 11
Note: If the lever does not latch properly, disconnect
the wire from the spark plug and check for and remove
any debris buildup in the tunnel.

Product Overview

1. Spark plug
2. Cutting-height lever (4)
3. Air filter
4. Fuel-tank cap
8
Figure 12
Model 20995
5. Recoil-start handle
6. Blade-control bar
7. Self-propel-drive bar
8. Oil fill/Dipstick