Pip Operation With A Vcr - No Cable Box - Panasonic CT-27D11D Mode D'emploi

2 T PIP O
UNER PERATION WITH A
2 Tuner PIP Operation with a VCR - No Cable Box
Note:
This television includes a two tuner Picture In Picture (PIP) feature. This allows
watching two (2) live broadcasts at the same time without or with an external video
source (VCR).
Connect your television to a VCR, as shown.
TO AUDIO
AMP
L
ANT IN
R
CABLES NOT SUPPLIED
Note:
Procedure
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note:
To view an external video source in the PIP frame:
12
VCR - N
Refer to the FEATURE COMPARISON CHART on page 3 for your television PIP capability.
CONNECTIONS ON BACK OF TV
COMPONENT
R AUDIO
VIDEO INPUT
P
R
INPUT 1
S-VIDEO
R AUDIO
INPUT 2
The Remote Control must be programmed with the supplied codes to operate the VCR. See
Programming the Remote Control in the Remote Control Quick Reference Guide.
The audio is from the Main Picture only.
1. Press the TV/VIDEO button on the Remote Control to select the same video input to
which your VCR is connected.
2. Verify the VCR is on.
Choose channels for the Main Picture by pressing the TV button on the Remote
3.
Control and using the numeric keypad or CH up/down button.
4. Choose channels for the PIP frame by pressing the TV button on the Remote Control
and using the PIP Channel up/down buttons.
.
The SWAP button switches the PIP and
Main Picture source. Press the RECALL
button for on screen PIP and Main Picture
source status.
C B
O ABLE OX
L
P Y/VIDEO
B
VIDEO
L
SWAP and RECALL Buttons
VCR
VIDEO OUT
ANT IN
L
Incoming
AUDIO OUT
Cable
R
ANT OUT