Optional Equipment Connections; Vcr Connection; Front Control Panel; Cable Box Connection - Panasonic CT-20G8 Manuel D'utilisation

Optional Equipment Connections

Note: The remote control must be programmed with supplied
codes to operate the optional equipment.

VCR Connection

VCRs, video disc players, video game equipment, and
DSS equipment can also be connected to the video inputs.
See the optional equipment manual for more information.
Note for models with Component video input:
• VIDEO 1 input is a dual-purpose input. It is
primarily intended for connection with 480i devices
such as a DVD player using the Y P
component video jacks and Audio L & R jacks.
However, it can also be connected to conventional
composite video sources such as a VCR, using
only the Y/Video jack and Audio L & R jacks. The
on-screen label will display Component or Video 1
depending on which source is connected.
ONNE TIONS ON BA K OF THE TV
INPUT 1
R AUDIO
COMPONENT
VIDEO INPUTS
P P
R B
NT
INPUT 2
S-VIDEO
R AUDIO
ABLES NOT SUPPLIED
Note: Rear A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 2 for your
model capabilities.
Procedure
• Connect equipment as shown to rear Audio/Video input
jacks.
Note: Use either the S-Video or Video Connection for
models with S-Video connection.
• Select the Video mode by pressing TV/VIDEO button.
• Operate optional equipment as instructed in equipment
manual.

Front Control Panel

The front control panel can be used to access menus and
switch video mode when the remote control is not
available.
Note: Front A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 2 for your
model capabilities.
A second VCR, Camcorder, a video disc player, video
game equipment or DSS equipment can also be connected
to the vidoeo inputs. See the optional equipment manual.
Procedure
• Connect equipment to front Audio/Video input jacks.
• Select the Video mode by pressing TV/VIDEO button.
• Operate optional equipment as instructed in equipment
manual.
B
V R
VIDEO OUT
L
L
Y/VIDEO
AUDIO OUT
R
ANT OUT ANT IN
L VIDEO
Incoming
able
O
PTIONAL

Cable Box Connection

Follow this diagram when connecting your television to a
Cable Box.
CABLE BOX
PL Y
R FF
E
W
STOP
ANT IN ANT OUT
P
R
Incoming
Cable
Note: Rear A/V jacks diagram may vary, depending on
model. Please refer to the FEATURE CHART on page
2 for your model capabilities.
PL Y
R E FF
W
STOP
Procedure
• Tune the television to channel 3 or 4 depending on the
RF out setting of the cable box.
• Using the cable box, tune to the premium cable channel
you want to view.
Digital TV - Set-Top Box (DTV-STB) or DVD
Player Connection (some models)
Use this diagram to connect the Panasonic DTV-STB
(Digital TV-Set-Top Box) to the back of your TV.
Note: Rear A/V jacks diagram may vary, depending on
model. Please refer to the FEATURE CHART on page
2 for your model capabilities.
TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
DIGITAL TV OUTPUT
Y
MAIN
VIDEO
R-AUDIO-L - VIDEO S-VIDEO
NTSC OUTPUT
Notes:
• There are three video jacks, Y, P
Separate
luminance and color separation. Use the L (left)
and R (right) audio inputs.
• Select DTV-STB to 480i output mode. TV set can
receive 480i signal only.
E C
QUIPMENT ONNECTIONS
CONNECTIONS ON BACK OF THE TV
INPUT 1
R AUDIO
COMPONENT
VIDEO INPUTS
P
R
NT
INPUT 2
S-VIDEO
R AUDIO
CABLES NOT SUPPLIED
CABLES NOT SUPPLIED
INPUT 1
COMPONENT
VIDEO INPUTS
P P
R
B
P
R
NT
INPUT 2
S-VIDEO
COMPOMENT INPUT TERMINALS ON BACK OF THE TV
component color inputs
L
P Y/VIDEO
B
L VIDEO
R AUDIO L
P Y/VIDEO
B
R AUDIO L VIDEO
, and P .
B R
provide
5 l