Special Features; Aspect Button; Bbe Button; Sap Button - Panasonic CT-30WC14 Manuel D'utilisation

S F
PECIAL EATURES

Special Features

ASPECT Button

Customer Options depending on Component Input Signal
INPUT
DISPLAY ON SCREEN
SIGNAL
1080i
480p (16:9)
Default to FULL mode.
480p (4:3) Note: Will stretch picture
480i Default to JUST mode
The ASPECT button on the remote control lets you choose
one of four display modes, depending on the formats of the
received signal and your preferences.
ASPECT
Input Signal
480i or 480p
4:3
Note: If menu is displayed while in Zoom mode, the aspect
will change to Full to display complete menu.
480i

BBE Button

Press this button to turn BBE sound feature On or Off.

SAP Button

Press this button to let you cycle through different audio modes.
For example:
• If receiving STEREO, SAP and MONO or receiving
STEREO and MONO only, pressing SAP button will
toggle the audio as follows:
STEREO
10
I n A SPECTImage on JUST p
9 16 ASPECTI 4 ASPECT m 8 a 0 g e i o o n r l 8 0 p I n p
ASPECT BUTTON
OPTIONS
16:9 only No options
4:3, Full or Zoom (see
Default to 16:9
4:3, Full or Zoom (see
horizontally.
4:3, Full, Just or
Zoom (see below)
This will display a 4:3 picture
at its standard 4:3 size with
Image on
16:9 Screen Size
black side
recommended
4
4:3 pictures as it may create
3
a permanent
screen if displayed for a
prolonged period of time.)
This will show picture at full
screen size. (Recommended
for anamorphic pictures.)
9
This will stretch the right and
left edges of a 4:3 picture to
fill the screen, The center of
the screen will have aspect
16
correction applied. The size
9
of the picture will depend on
the original signal.
(Recommended for regular
TV viewing.)
SAP MONO
16
u t S i
u t S i g n a l

Split Operation

This feature lets you watch two different channels side by
side with or without an external video source.
Procedure
• Press
• Choose channels for the SPLIT frame by pressing
below)
below) in Split frame, then use
control numeric keypad.
Note: Split frame channel can only be changed while right
indicator (
bars. (Not
for viewing
Change Split Frame channel
image on
• Select channels for the Main picture by pressing
• Press
PICTURE source.
• Press
• Press
Split Operation With a Cable Box
To view premium (scrambled) cable channels through your
cable box in the Main Picture:
Note: Use this procedure if you want to watch premium cable
channels in the Main Picture while viewing a television
program or video in the Split frame.
Procedure
• Tune TV to Channel 3.
• Press
frame.
Note: Audio is from the Main Picture only.
• Verify that the Cable box is ON.
• Choose channels for the Main Picture by tuning the
cable box.
• Choose channels for the SPLIT frame by pressing
SPLIT CTRL
control numeric keypad.
Note: Swap is not available when using the cable box to tune
channels. If your cable box has video output, it can be
connected to the TV to allow you to use all SPLIT
functions.
g n a l
SPLIT
to display Split frame.
SPLIT CTRL
button. The right indicator (
)is displayed in split frame.
CH
or use the remote control numeric keypad.
or
CH
SWAP
to switch the SPLIT FRAME and MAIN
RECALL
to view picture source status.
SPLIT
to cancel Split frame.
SPLIT
on the remote control to display Split
button, then use
) will appear
CH
or the remote
or
CH
Change Main Picture channel
or the remote
or