HBM S9M Notice De Montage page 12

Scope of supply and equipment variants
- D-SUB HD connector: a 15-pin plug for connection to appropriate ampli­
fier systems, e.g. the HBM QuantumX system (option Q)
- 3106 PEMV connector (Greenline): For connection to appropriate ampli­
fier systems, e.g. MGCplus with AP03. (option N)
- ConP1016 connector, 14-pin, for connection to the Somat XR measure­
ment system. (option P)
- Free ends: transducer delivered without plugs (option Y)
3. TEDS
You can order the force transducer with transducer identification ("TEDS").
TEDS (Transducer Electronic Data Sheet) allows you to store the transduc­
er data (characteristic values) in a chip that can be read out by a connected
measuring device (with an appropriate amplifier). HBM records the TEDS
data before delivery so that no parameterization of the amplifier is nece­
ssary. TEDS can only be fitted in the plug of the S9M, therefore it is not
possible to equip the "free cable ends" version with TEDS.
10
A03019_05_YI0_04 HBM: public
S9M