Publicité
MVE
Ex d
MVE
.....
...
Serial Number: Refer to the last page of this manual.
Conform with the following directive listed on the following declaration.
with the requirements of the following Community Directives and subsequent modifi cations
-
Directive "ATEX" 94/9/CE of 23 March,1994
-
Directive "EMC" 2004/108/CE of 15 December, 2004
The conformity has been verifi ed according to the conditions included in the following standard
documents:
CEI EN 60034-1, CEI EN 60079-0, CEI EN 60079-1
ording to the Machine Directive
2006/42/EC the family of external vibrators over mentioned are identifi ed as "PARTLY COMPLETED MACHINERY"
Acc
"B" Type:
» These products are manufactured according to 2006/42/EC AND SUBSEQUENT AMENDMENTS
» These products must not be put into service until the fi nal machinery into which it is to be incorporated has been declared in conformity
with the provisions of this Directive, where appropriate.
» The protection requirements of directive 2006/95/EC have been observed in accordance with Appendix I No. 1.5.1 Machinery Directive
2006/42/EC."
According to Annex II B of Directive 2006/42/EC machines, the following essential requirements of safety and health protection are
applied and respected:
1.1.1. - De nitions
1.1.2. - Principles of safety integration
1.1.3. - Materials and products
1.1.5. - Design of machinery to facilitate its handling
1.3.1. - Risks of loss of stability
1.3.2. - Risks of break-up during operation
1.3.3. - Risks due to falling or ejected objects
Technical documentation is compiled in accordance with part B of Annex VII.
OLI SpA undertakes to transmit by mail or e-mail, in response to a reasoned request by the national authorities, relevant information on
the products mentioned on the present declaration, except for intellectual properties of the producer.
The person authorised to compile the technical documentation is Giorgio Gavioli, Via Canalazzo, 35 – 41036 Medolla (MO) Italy
Medolla 02/09/2011
DECLARATION
-
SERKLÄRUNG
-
CM
C
US
Intertek
DECLARATION
-
DICHIARAZIONE
-
Via Canalazzo, 35 - 41036 Medolla (MO) - ITALY
that the family of external electric vibrators:
D
5
Ambient Temperature -20°C / +55°C
ATEX Exd
003= 3000 rpm max
015= 1500 rpm max
010= 1000 rpm max
075= 750 rpm max
Fc max from 250 to 5500 Kg (three-phase motor)
For U.S. MARKET: Fc max from 550 to 12260 Lb (three-phase motor)
Internal code: Electric vibrator
EC DECLARATION OF CONFORMITY
II 2GD Ex d IIB T3
0044
Ex d IIB T4 Gb
N. TÜV 08 ATEX 362386 X - IECEx TUN 08.0012X
Environmental Temperature: -20°C / +55°C
DECLARATION OF INCORPORATION
1.3.4. - Risks due to surfaces, edges or angles
1.3.7. - Risks related to moving parts
1.3.8. - Choice of protection against risks arising from
moving parts
1.3.9. - Risks of uncontrolled movements
1.4.1. - General requirements
1.5.1. - Electricity supply
SPA
Declare
For U.S. MARKET:
1.5.2. - Static electricity
1.5.4. - Errors of tting
1.5.6. - Fire
1.5.7. - Explosion
1.5.8. - Noise
1.6.1. - Maintenance on the machine
1.6.4. - Operator's intervention
09.11
M.
OLI163EXC4L
2 POLES (3600 rpm max)
4 POLES (1800 rpm max)
6 POLES (1200 rpm max)
8 POLES (900 rpm max)
1.7.1. - Information and warnings on the machine
1.7.2. - Warning of residual risks
1.7.3. - Marking of machinery
1.7.4. - Instruction
1.7.4.1. - General principles for the drafting of instruc-
tions
1.7.4.2. - Contents of the instructions
Giorgio Gavioli
(General Manager)
2
23
Publicité
