Publicité
Important
To reduce the risk of fire, electric shock or injury:
• Never leave the machine unattended while power cord is connected.
• Always wear personal protective equipment (PPE) when operating this machine.
• Never inhale dust created by the use of this machine. Any modifications to this machine may result in damage to
the machine or injury to the operator or others nearby. Alterations to the machine will also void any and all warranty
and liabilities.
• Sanding wood decks is not recommended by Dustbane due to uneven surfaces which could lead to damage to the
machine. Some pressure treated wood found in decking contains arsenic that, when sanded, will create hazardous dust.
Dustbane assumes no liability if the machine is used on decks, and damage caused from sanding pressure treated wood
will not be warranted.
• Do not operate this machine around fuels, solvents, flammable floor finishes, thinners, wood particulate or any flammable
materials. Cigarette lighters, pilot lights, electrical sparks and all other sources of ignition should be extinguished or
avoided. Work areas should be well ventilated.
• Keep the power cord clear of the pad. Always lift the cord over the machine. Do not pull on the power cord in an attempt
to move the machine. This could result in electrocution.
• Do not use machine if it has been sprayed with water or left out in the rain. This could result in a shock, injury or electrocution.
• Keep feet, hands, and loose clothing away from any moving parts on the machine to avoid injury. Disconnect power cord
before changing the pad or when servicing. Damage can occur to the machine or to other property if instructions in the
owner's manual are not followed.
• Do not operate this machine while under the influence of alcohol or other drugs.
• Never allow children under age 18 to operate this machine.
• Unplug machine from power source before adjusting height of handle or changing pad.
• Servicing this machine while still connected to a power source could lead to electrocution or fire. Before performing
machine service or maintenance, disconnect the machine from its power source. Operating this machine with a damaged
power cord could lead to electrocution or fire. Cord should remain clear of moving parts during operation. Never use the
cord to navigate the machine.
6
Parts & Operations Manual
Integra-D
Publicité
