Setting Print Times For The Fax Call Report; To Set The Print Times For The Fax Call Report - HP LaserJet 3015 Mode D'emploi

Setting print times for the fax call report

You can set the device to print a fax call report after any of the following events:
●
●
●
●
●
●
If you select Never, you will have no indication that a fax failed to be transmitted unless you
Note
print a fax activity log.

To set the print times for the fax call report

Use the following steps to set when the fax call report is printed:
1. Press
2. Use the
3. Use the
4. Press the
5. Use the
6. Press
The following print-time options are available:
●
●
●
●
●
●
70 Chapter 4 Fax Logs and Reports
Every fax error (the factory-set default)
Send fax error
Receive fax error
Every fax
Send fax only
Never
/ .
MENU ENTER
< or the > button to select Reports, and then press
< or the > button to select Fax Call report, and then press
> button once to select Print report, and then press
< or the > button to select the option for when you want the fax call reports to
be printed.
/ to save your selection.
MENU ENTER
Every error: The device prints a report each time an error occurs.
Send error: The device prints a report when an error occurs while the device is sending
a fax.
Receive error: The device prints a report when an error occurs while the device is
receiving a fax.
Every fax: The device prints a report when a fax is sent or received.
Send fax only: The device prints a report when a fax is sent.
Never: A report is never printed.
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
ENWW