Connecting The Device To A Telephone Line; Connecting The Hp Laserjet 3015 All-In-One And The Hp Laserjet 3030 All-In-One - HP LaserJet 3015 Mode D'emploi

Connecting the device to a telephone line

To use the fax functions of the device, first connect the device to the telephone line. The
way you connect the device to the telephone line depends on how many telephone lines
you have coming into the telephone jack and, if you have multiple lines, which line you want
to use for faxing.
In order for the device to send or receive a fax without interruption, it must be the first device
Note
that is connected to the telephone jack.
Connecting the HP LaserJet 3015 all-in-one and the HP
LaserJet 3030 all-in-one
Complete the following instructions to connect the device to a telephone line.
To connect the device to a jack that controls one telephone line
Complete the following steps to connect the device to a single telephone jack that controls
one telephone line, even if you have two telephone numbers on that line and use a ring-
pattern service (such as distinctive ring).
1. If a telephone cord is plugged into the telephone jack, unplug the cord and set it aside.
2. Locate the fax ports on the back of the device.
3. Take the fax cord that is included with the device and plug one end of it into the device
You must use the fax cord that came with the device in order to ensure that the device
Note
functions correctly.
4. Plug the other end of the fax cord into the wall-jack.
If you want to connect additional devices (such as a telephone, an answering machine, or a
caller-ID box) to the telephone line, see
If you do not want to connect any additional devices, see
10 Chapter 1 Fax Setup
"line" port (the port that is marked with a icon).
Connecting additional
Specifying the fax
devices.
settings.
ENWW