To Delete Speed-Dial Entries And One-Touch Keys; To Program Speed-Dial Entries Or One-Touch Keys Quickly - HP LaserJet 3015 Mode D'emploi

10. Press
11. If you have more speed-dial entries or one-touch keys to program, repeat steps 1
through 10.

To delete speed-dial entries and one-touch keys

1. Press
2. Use the
3. Press
4. Press
5. Use the
6. Use the alphanumeric buttons to enter the number of the speed-dial entry you want to
delete, and then press
7. Press

To program speed-dial entries or one-touch keys quickly

Note The following procedure cannot be used to program a group-dial entry. For group-dial entry
instructions, see
Complete the following steps to program speed-dial entries and one-touch keys easily from
the device control panel:
1. Complete one of the following tasks:
On the device control panel, press
entry, and then press
Press an unprogrammed one-touch key. The control panel display notifies you that the
speed-dial entry or one-touch key has not been programmed.
2. Press
3. Enter the fax number, and then press
numbers, such as an area code, an access code for numbers outside a PBX system
(usually a 9 or 0), or a long-distance prefix. (See
information.)
Note When entering a fax number, press
in the dialing sequence. Press
4. Use the alphanumeric buttons to enter a name for the fax number. To do so, repeatedly
press the alphanumeric button for the letter that you need until the letter appears. (For a
list of characters, see
5. Press
ENWW
/ to save the information.
MENU ENTER
/ .
MENU ENTER
< or the > button to select Fax setup, and then press
/ to select Phone Book.
MENU ENTER
/ to select Individual setup.
MENU ENTER
< or the > button to select Delete, and then press
/
MENU ENTER
/ to confirm the deletion.
MENU ENTER
To program group-dial
/
MENU ENTER
/ to program the speed-dial entry or one-touch key.
MENU ENTER
* until W appears if you want the device to wait for a dial tone.
Using dialing
/ to save the information.
MENU ENTER
About speed-dial entries, one-touch keys, and group-dial entries
.
entries.
, enter an unprogrammed speed-dial
PHONE BOOK
.
/ . Include pauses, or other needed
MENU ENTER
Using dialing characters
/ until a comma (,) appears to insert a pause
PAUSE REDIAL
characters.)
/ .
MENU ENTER
/ .
MENU ENTER
for more
49