Changing The Silence-Detect Mode; To Change The Silence-Detect Mode - HP LaserJet 3015 Mode D'emploi

Changing the silence-detect mode

This setting controls whether or not you can receive faxes from older-model fax machines
that do not emit a fax signal during fax transmissions. At the time of this publication, these
silent-model fax machines represented very few of the fax machines in use. The default
setting is Off. The silence-detect mode setting should be changed only if you regularly
receive faxes from someone who uses an older-model fax machine.

To change the silence-detect mode

1. Press
2. Use the
3. Use the
4. Use the
5. Use the
selection.
ENWW
/ .
MENU ENTER
< or the > button to select Fax setup, and then press
< or the > button to select Fax Recv. setup, and then press
< or the > button to select Silence Detect, and then press
< or the > button to select On or Off, and then press
/
MENU ENTER
MENU
MENU
/
MENU ENTER
Changing the silence-detect mode
.
/ .
ENTER
/ .
ENTER
to save your
63