Table des Matières
Publicité
Assign or change the system password using the Embedded Web Server
Assign an administrator password for access to the printer and the HP Embedded Web Server so that
unauthorized users cannot change the printer settings.
Access the Embedded Web Server (EWS) requires a personal identification number (PIN). The default PIN for this
printer is located on a sticker inside the front door. Use this PIN to open the EWS when prompted.
The default PIN (password) can be changed in the EWS (Settings > Security > Password Settings).
1.
Open the HP Embedded Web Server (EWS):
a.
From the Home screen on the printer control panel, touch the Wireless icon
to view the printer's IP address or host name.
b.
Open a web browser, and in the address line, type the IP address or host name exactly as it displays on
the printer control panel. Press the
NOTE:
the option to continue to the website. Accessing this website will not harm the computer.
2.
On the EWS Home page, click the Settings tab.
3.
In the left navigation pane, click Security to expand the options, and then click Password Settings.
4.
Enter a password.
5.
Re-enter the password in the Confirm Password field, and then click Apply.
NOTE:
Paramètres d'économie d'énergie
En savoir plus sur les paramètres d'économie d'énergie disponibles sur votre imprimante.
If a message displays in the web browser indicating that the website might not be safe, select
Make note of the password and store it in a safe place.
Assign or change the system password using the Embedded Web Server
Enter
key on the computer keyboard. The EWS opens.
or the Ethernet icon
97
Publicité
Table des Matières
Dépannage
