Changing The Sound-Volume Settings; To Change The Fax-Sounds (Line-Monitor) Volume (Hp Laserjet 3015); To Change The Fax-Sounds (Line-Monitor) Volume (Hp Laserjet 3030 All-In-One Or The Hp Laserjet 3380 All-In-One); To Change The Ring Volume - HP LaserJet 3015 Mode D'emploi

Changing the sound-volume settings

Control the volume of the fax sounds from the device control panel. You can make changes
to the following sounds:
●
●
The factory-set default for the fax-sounds volume is Soft. For general information about
controlling volume settings, see the electronic User Guide.
To change the fax-sounds (line-monitor) volume (HP LaserJet
3015)
Complete the following steps to change the fax-sound volume on the the HP LaserJet 3015
all-in-one.
1. Press
2. Use the
3. Use the
4. Use the
5. Use the
6. Press
To change the fax-sounds (line-monitor) volume (HP LaserJet
3030 all-in-one or the HP LaserJet 3380 all-in-one)
Complete the following steps to change the fax-sounds volume on the HP LaserJet 3030 all-
in-one or the HP LaserJet 3380 all-in-one.
1. Press
2. Use the
3. Press

To change the ring volume

When the device is initially receiving a call, a ring alert is audible. The ring duration length is
based on the local telephone company ring-pattern length. The factory-set default for the
ring volume is Soft.
1. Press
2. Use the
3. Use the
4. Press the
5. Use the
6. Press
46 Chapter 2 Faxing (basic)
The fax sounds that are associated with incoming and outgoing faxes
The ring for incoming faxes
/ .
MENU ENTER
< or the > button to select Common settings, and then press
< or the > button to select Volume settings, and then press
< or the > button to select PhoneLine Volume, and then press
< or the > button to select Off, Soft, Medium, or Loud.
/ to save your selection.
MENU ENTER
on the control panel.
VOLUME
< or the > button to select Off, Soft, Medium, or Loud.
/ to save your selection.
MENU ENTER
/ .
MENU ENTER
< or the > button to select Common settings, and then press
< or the > button to select Volume settings, and then press
> button once to select Ring volume, and then press
< or the > button to select Off, Soft, Medium, or Loud.
/ to save your selection.
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
ENWW