To Load Fax Documents On The Flatbed Scanner - HP LaserJet 3015 Mode D'emploi

To load fax documents on the flatbed scanner

The following instructions do not pertain to the HP LaserJet 3015 all-in-one, which is not
Note
equipped with a flatbed scanner.
1. Before loading the fax documents on the scanner glass, make sure that nothing is in the
automatic document feeder (ADF) input tray.
2. Open the scanner lid.
3. Place the document to be faxed print-side-down on the flatbed scanner, and then close
the scanner lid.
The document is now ready to be faxed.
Make sure that the glass-size setting matches the size of the document that you are faxing.
Note
For more information, see
To prevent damaging the device, do not allow the scanner lid to fall onto the flatbed scanner
CAUTION
surface. Always close the scanner lid when the device is not in use.
ENWW
Changing the default glass-size setting.
Loading originals to fax 25