Connect To Additional Computers On A Network; Find More Information; Power Specifications; Ink Usage - HP Photosmart Wireless B109 Série Mode D'emploi

Get the most out of your HP Photosmart

Connect to additional computers on a network

You can connect the HP Photosmart to more than one computer on a small network of computers.
If the HP Photosmart is already connected to a computer on a network, for each additional computer you
must install the HP Photosmart Software. During installation of a wireless connection, the software will
automatically discover the product on the network. Once you have set up the HP Photosmart on the network
you will not need to configure it again when you add additional computers.
Change the HP Photosmart from a USB connection to a
network connection
If you first install the HP Photosmart with a USB connection, you can later change to a wireless network
connection. If you already understand how to connect to a network, you can use the general directions
below.
To change a USB connection to an integrated wireless WLAN 802.11 connection
1. Unplug the USB connection from the back of the product.
2. Insert the product CD in the computer CD-ROM drive.
. Select Add a Device, and then follow the onscreen instructions for a wireless network installation.

Find more information

All other product information can be found in the electronic Help and Readme. Electronic Help includes
instructions on product features and troubleshooting. It also provides product specifications, legal
notices, environmental, regulatory, and support information. The Readme file contains HP support contact
information, operating system requirements, and the most recent updates to your product information.
To access the Electronic Help
• Windows: Click Start > All Programs > HP > Photosmart Wireless B109 series > Help.
• Mac OS X v10.4: Click Help > Mac Help, Library > HP Product Help.
• Mac OS X v10.5: Click Help > Mac Help. In the Help Viewer, select HP Product Help.
Windows 7
Windows 7 support information is available online: www.hp.com/go/windows7.

Power specifications:

Power adapter: 0957-2269
Input voltage: 100 to 240 Vac
Input frequency: 50-60 Hz
Power Delivery Capability: 20W Average
Note: Use only with the power adapter supplied
by HP.

Ink usage

Note: Ink from the cartridges is used in the printing
process in a number of different ways, including
in the initialization process, which prepares the
device and cartridges for printing, and in printhead
servicing, which keeps print nozzles clear and
ink flowing smoothly. In addition, some residual
ink is left in the cartridge after it is used. For more
information see www.hp.com/go/inkusage.