Changing The Redial Settings; To Change The Redial-On-Busy Option; To Change The Redial-On-No-Answer Option; To Change The Redial-On-Communication-Error Option - HP LaserJet 3015 Mode D'emploi

Changing the redial settings

If the device was unable to send a fax because the receiving fax machine did not answer or
was busy, the device attempts to redial based on the redial-on-busy, redial-on-no-answer,
and redial-on-communication-error options. Use the procedures in this section to turn these
options on or off.

To change the redial-on-busy option

If this option is turned on, the device redials automatically if it receives a busy signal. The
factory-set default for the redial-on-busy option is On.
1. Press
2. Use the
3. Use the
4. Use the
5. Use the

To change the redial-on-no-answer option

If this option is turned on, the device redials automatically if the receiving machine does not
answer. The factory-set default for the redial-on-no-answer option is Off.
1. Press
2. Use the
3. Use the
4. Use the
5. Use the

To change the redial-on-communication-error option

If this option is turned on, the device redials automatically if some sort of communication
error occurs. The factory-set default for the redial-on-communication-error option is On.
1. Press
2. Use the
3. Use the
4. Use the
5. Use the
38 Chapter 2 Faxing (basic)
/ .
MENU ENTER
< or the > button to select Fax setup, and then press
< or the > button to select Fax Send setup, and then press
< or the > button to select Redial if busy, and then press
< or the > button to select On or Off, and then press
/ .
MENU ENTER
< or the > button to select Fax setup, and then press
< or the > button to select Fax Send setup, and then press
< or the > button to select Redial-no answer, and then press
< or the > button to select On or Off, and then press
/ .
MENU ENTER
< or the > button to select Fax setup, and then press
< or the > button to select Fax Send setup, and then press
< or the > button to select Redial Comm Err., and then press
< or the > button to select On or Off, and then press
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
ENWW