Make A Copy; Replace The Print Cartridges - HP Photosmart C4400 All-in-One Série Guide D'utilisation

Masquer les pouces Voir aussi pour Photosmart C4400 All-in-One Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Make a copy

You can make quality copies from the control panel.
To scan to a computer
1.
Load your original print side down on the right front corner of the glass.
NOTE:
on the product.
2.
Press the button next to Scan/Reprint.
The Scan/Reprint menu appears.
3.
Press the button next to Scan to PC.
A preview image of the scan appears on your computer, where you can edit it. Any
edits that you make apply to the current scan session only.
The HP Photosmart Software has many tools that you can use to edit your scanned
image. You can improve the overall image quality by adjusting the brightness,
sharpness, color tone, and saturation. You can also crop, straighten, rotate, or resize
the image.
4.
Make any edits to the preview image, and then click Accept when you are finished.

Replace the print cartridges

Follow these instructions to replace print cartridges. Following these instructions might
also help solve print quality issues related to the cartridges.
NOTE:
computer screen. You can also check the ink levels by using the software installed
with the HP All-in-One.
When you receive a low-ink warning message, make sure you have a replacement print
cartridge available. You should also replace the print cartridges when you see faded text
or if you experience print quality issues related to the print cartridges.
To order print cartridges for the HP All-in-One, go to www.hp.com/buy/supplies. If
prompted, choose your country/region, follow the prompts to select your product, and
then click one of the shopping links on the page.
To replace the print cartridges
1.
Make sure the product is turned on.
CAUTION:
access the print cartridges, it will not release the cartridges for changing. You
might damage the product if the print cartridges are not docked safely when you
try to remove them.
2.
Make sure you have letter or A4 unused plain white paper loaded in the input tray.
3.
Open the print cartridge door.
The print carriage moves to the far right side of the product.
Ensure that there are no memory cards inserted in the memory card slots
When the ink level for the print cartridge is low, a message appears on your
If the product is turned off when you open the print cartridge door to
Replace the print cartridges
9

Publicité

Chapitres

Table des Matières
loading

Table des Matières