Specify The Original Type And Make Image Adjustments - HP Designjet T1120 SD-MFP Guide De Référence Rapide

7. When an original is scanned, it is ejected. The Batch Mode dialog returns and
asks for the next original.
8. Remove the ejected original and feed the next one.
9. Continue to feed originals until finished with the batch.
10. Press the Batch Mode dialog's Cancel button to abort batch mode.
NOTE: Previewing is disabled when in Batch Mode.
NOTE: To ensure fast loading in batch mode, the scanner will automatically eject
each original after it is scanned. The setting in Options > Basic Options > Rewind
after scan will determine the direction. If the option is selected, scanned originals
will be ejected towards the front and if the option is not selected, scanned originals
will be ejected out the back.

Specify the original type and make image adjustments

Basic capture parameters are set when you select Original Type. You can then
adjust specific factors such as image brightness, sharpening and background
cleaning level. The adjustments available will depend on the Original Type
selection.
1. Press the Scan or Copy button and then the Original Type button to reach
the Original Type selection list.
2. Select an Original Type that best describes your original.
ENWW
Specify the original type and make image adjustments
11