Scan To A File - HP Designjet T1120 SD-MFP Guide De Référence Rapide

See also:
●
Set and preview image adjustments on page 15
●
Set input and output sizes on page 13
●
Set the output quality on page 17

Scan to a file

Follow the steps below to scan to file.
1. Insert and feed your document into the scanner with the side to be scanned
facing upwards.
2. Press the Scan button to access the scan to file settings and buttons. The
Scan dialog is shown below.
3. Press the Original Type button and select the type that matches/describes
your document. See
on page
4. Press the Quality button and select the scan resolution.
5. Press the Scan Area button to set the size of the image capture area. If you
wish to capture the whole image, select Auto and the system will measure
and set the size for you.
6. Press the File Format button to determine the file format, such as JPG or
TIFF.
7. Press the File Name button to enter a name for the destination file.
8. The Destination button shows where your scan output file will be created.
Press the Destination button if you want to select a different destination.
9. Toggle the Preview before Scan button to On if you want to control your
settings before saving to file. See
10.
When you have made your settings, press the Start Scan/Copy button
start scanning.
ENWW
Specify the original type and make image adjustments
11.
Preview copies and scans on page 15.
to
Scan to a file
9