Installer Checklist - Thermador P24GE Mode D'emploi

FINAL CHECK LIST
❑ Cooktop correctly positioned
and anchored in countertop
recess.
❑ S p e c i f i e d c l e a r a n c e s
m a i n t a i n e d t o c a b i n e t
surfaces.
❑ Unit Level – front to back
– side to side.
❑ Burner caps positioned
properly on sealed burner
bases.
❑ All packaging material
removed.
❑ Backguard attached (if
horizontal clearance to
combustible materials behind
cooking surface is less than
12").
❑ The stainless steel radiant
and porcelain grill grate is in
place (not all models).
❑ The griddle plate and frame
is correctly positioned, tilted
slightly forward. (See page 8
for adjustment procedure.)

INSTALLER CHECKLIST

GAS SUPPLY
❑ Connection: 3/4" NPT with a
minimum 3/4" diameter flex
line.
❑ The appliance is connected
only to the type of gas for
which it is certified for use.
❑ Manual gas shut off valve
installed in an accessible
location (without requiring
removal of appliance).
❑ Unit tested and free of gas
leaks.
❑ Gas supply pressure does not
exceed 14" W.C.
ELECTRICAL
❑ Polarized and grounded
120VAC, 10 Amp receptacle
with 10 Amp over-current
protection is provided for
service cord connection.
❑ For models with the 12"
electric griddle (PC364GE,
PC486GE, and PC484GGE),
a polarized and grounded
120VAC receptacle with 15
AMP overcurrent protection
is provided for service cord
connection.
❑ For models with the 24"
electric griddle (P24GE
and PC484GE), a properly
grounded, 240 VAC service
connection with 30 AMP
overcurrent protection is
provided.
14
OPERATION
❑ All internal packing materials
removed. Check below grates
and grill pans.
❑ Burner caps properly seated
into burner bases.
❑ Grill components properly
seated (not all models). Refer
to Care & Use Manual for Grill
details.
❑ Bezels centered on burner
knobs, and knobs turn
freely.
❑ E a c h b u r n e r
satisfactorily, both individually
and with other burners
operating.
❑ Air Shutter adjustment for
proper flame made for the
Grill. See Fig. 13.
❑ Griddle is tilted slightly
forward and does not rock
(not all models).
❑ Burner grates correctly
positioned, level, and do not
rock.
l i g h t s