Set The Clock - SOUNDMASTER UR411 Mode D'emploi

• Use USB Charging socket
- Connect a USB cable (not supplied) to USB socket to charge your smartphone or tablet PC.
• Uses of Qi (wireless charging)
- This function only works with mobile devices that support Qi technology.
- Put your device with the backside to the logo, the device screen is informing you about the charging status.
Note: It can be happen that the DAB & FM radio reception is affected while charging the device with Qi
technology.

Set the Clock

Synchronization the Clock
1. In the standby mode, press and hold the MENU button on the remote control for few seconds, then
the unit will enter the CLOCK SYNC mode.
2. Press the / buttons on remote control or / buttons on the to switch the clock synchronization
p q
modes:
• RDS Only synchronize with the RDS radio station.
• OFF Turn off the clock synchronization function, only adjust the clock manually.
3. Then press the button on the unit or the /PAIR button on the remote control to confirm.
Manual Setting the Clock
1 In STANDBY mode, press and hold the CLOCK button on the remote control or the
SNOOZE/DIMMER button on the main until the hour indicator blinks.
2 Set the hour with
3 Press the CLOCK button on remote control or SNOOZE button on main unit to confirm.
4 Repeat steps 2-3 to set the minutes.
Note: During Time Setup, press the
/ button on remote control or / button on main unit.
p q
button to select 12/24 hour format.
8