Basic Operations; Power On/Off; Selecting Modes; Adjusting The Volume - SOUNDMASTER DAB970 Manuel D'instructions

Power ON/OFF

Press the " " knob on the unit or the " " button on the remote control to turn the unit on.
Press again the " " knob or the " " button on the remote control to turn the unit off.

Selecting modes

During on mode, press the " " button on the unit repeatedly to switch between the modes or
press the desired function on the remote control.

Adjusting the volume

Rotate the "VOLUME" knob on the unit or press the "V +/-" button on the remote control to
decrease or increase the volume.
NOTE:
If you adjust the volume above 26, then power off and power on again, the volume will restore to
the factory setting automatically.

Mute

During playing mode, press the "
from the speaker.
Press the " " button again, the "V +/-" button on the remote control or rotate the "VOLUME"
knob to cancel the mute function. The sound can be heard from the speakers again .
The first time you use the unit, or if the station list is empty, the radio automatically
performs a full scan to see what stations are available. You may also need to start a
scan manually to update the list of stations for one of the following reasons:
➢
New stations may become available from time to time.
➢
Stations close or can no longer be received (In the station list, invalid stations are
indicated with a question mark in front of their name).
➢
If reception was not good after the original scan (for example the antenna was not up),
this may result in an empty or incomplete list of available stations.
➢
If you have poor reception of some stations causing the audio to break up, you may
wish to list only stations with good signal strength.
Press the " " button repeatedly on the unit or press the "DAB" button on the remote control
until "DAB" is displayed to select the DAB function.

Full Scan

Press the "MENU" button, select with the "
"OK" button to confirm. The unit starts a complete scan. Once a scan is complete, the radio
returns to playing the previously selected station or first station on the station list.

Selecting stations

1. Use the "
/
the unit to scroll through the list of station.
2. Press "OK" on the remote control or on the unit to change station.

BASIC OPERATIONS

" button on the remote control, the sound will not be heard
" button on the remote control or rotate the "NAVIGATE" button on

DAB

" buttons the function "Full scan" and press the
/
6
DAB970 / English Instruction Manual