Getting Started / Set Up; Get The Network Environment Ready; Main Menu; System Settings - SOUNDMASTER IR4400 Guide D'utilisation

Masquer les pouces Voir aussi pour IR4400:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 50
Mains operation:
Battery operation: Open the battery compartment door. Install 6 x1.5V LR20 / AM-1/D size
CAUTION:
• Remove batteries if they are flat or not being used for a long period of time.
• Batteries contain chemical substances, so they should be disposed of properly.
Make sure you have setup the wireless network and you have the WEP, WPA or WPA2 security
password to activate the connection.
You may also use the WPS (WiFi Protected Setup) function for easy pairing between the
network device and IR4400. Check if the light indicators on the network device are in
appropriate status.
Under the main menu, you can select the following modes:
Internet Radio, Media player, DAB, FM, Bluetooth, AUX-In, Sleep and
Alarm.
At the first time operation, system asks if you want to start the
Setup Wizard. The Setup wizard guides you through the basic setup
parameters for time/Date and Network connection. To change any
settings later all setting functions are accessible from the Settings Menu.

GETTING STARTED / SET UP

Connect the unit to a suitable power source using the power supply
provided. After showing a starting screen, it will enter the last used
listening mode. When the unit is started for the first time, the setup wizard
will be launched automatically.
batteries (not included) into the compartment. Please follow the correct
polarities as indicated. The batteries are automatically disconnected while
using the power supply

GET THE NETWORK ENVIRONMENT READY

SYSTEM SETTINGS

MAIN MENU

4
IR4400 / English Instruction Manual

Publicité

Table des Matières
loading

Table des Matières