Bluetooth; Headphone - SOUNDMASTER IR4400 Guide D'utilisation

Masquer les pouces Voir aussi pour IR4400:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 50
Now playing information
While the stream is playing, the screen shows its frequency, or if RDS signal is available, station
name and any further RDS information such as proramme name, title and other details. Stereo
broadcasts are indicated with an icon at the bottom of the screen. To view further information,
press Info button on the radio.
Each time you press Info button on the radio, another set of information is displayed, cycling
through Radio text, programme type, frequency and today's date
SETTINGS
Scan settings
Choose FM at first, it will go to a specific station playing. Then press "Menu" on the radio to get
above table.
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio
(hiss) from weak stations. To change the scan settings to stop only at stations with good signal
strength, select Yes after choosing Strong station only.
Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-
to-noise ratio (hiss). To play weak stations in mono, select FM weak reception: Listen in mono
only and then YES.
When you select the Bluetooth mode, the device is entering to
pairing and the BT icon at the bottom of the screen will flash.
Turn on your smartphone, tablet or other Bluetooth devices to
search for the device.
The Bluetooth pairing name is "IR4400".
When pairing is successful, the Bluetooth indicator will light up and
stop flashing.
To release BT pairing, turn off or unpair your smartphone, table or
other Bluetooth devices.
Press P4 / Pause or P5 / Play buttons on the radio to start or pause the playback. You can also
press P1 / Skip Backward or P2 / Skip Forward on the radio to play the previous or next track;
And you can press and hold any of these buttons to start fast rewind or forward searching.
To listen to music privately, use headphones with a 3.5 stereo jack plug and connect it to the
headphones socket. The speakers will then be muted.
To prevent possible hearing damage, do not listen at high volume levels for long
periods.

BLUETOOTH

HEADPHONE

17
IR4400 / English Instruction Manual
.

Publicité

Table des Matières
loading

Table des Matières