Equaliser; Network - SOUNDMASTER IR4400 Guide D'utilisation

Several preset EQ modes are available: Normal, Jazz, Rock, Movie,
Classic, Pop, News and My EQ.
In the My EQ settings, you can create your own EQ with custom bass
and treble settings.

Network wizard
Enter to search AP SSID, then input the WEP / WPA key or choose Push
Button/Pin/Skip WPS to connect to the wireless network.

PBC Wlan setup
Push Button Configuration, it is to connect the AP that supports WPS (Wi-Fi
Protected Setup).

View settings
View the information of current connected network: Active connection, MAC address,
Wlan
region, DHCP, SSID, IP address, Subnet mask, Gateway address, Primary DNS and
Secondary DNS.

WLAN region
Select the WLAN region to obtain the optimal WLAN connectivity: Europe or
Australia.

Manual settings
Choose wireless network connection and enable or disable DHCP (Dynamic Host
Configuration Protocol).

Network profile
IR4400 remembers the last four wireless networks it has connected to, and
automatically tries to connect to whichever one of them it can find. From here you
can see the list of registered networks. You can delete unwanted networks by turning
and pressing then choosing YES to confirm delete.

Keep network connected
If you choose to keep network connected, the WiFi will not
disconnect even you are in standby mode. Otherwise, the
connection will only available in internet radio and music
player modes. This option allows IR4400 to be ready for
DLNA streaming in any operating modes.
When Keep network connected is selected the standby
power consumption is raised.

EQUALISER

NETWORK

7
IR4400 / English Instruction Manual