Connections; Connect The Fm/Dab Antenna; Use Line In Socket; Connect Power - SOUNDMASTER UR411 Mode D'emploi

Connections

Connect the FM/DAB antenna

• Connect the supplied antenna to the DAB socket on the rear of the unit by turning the antenna's screw
cap clockwise. Do not over tighten as this could damage the antenna.
• To avoid noisy interference, keep the antenna away from the unit, the connecting cord and the power
cord.
• You may need to reposition the aerial for optimum reception.
• The best position is dependent on the station and the strength of the signal.

Use LINE IN socket

- Use a 3.5mm to 3.5mm audio cable (included) to connect the audio player's headphone socket to the
LINE IN socket on the unit.

Connect Power

- Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on
the rating label on the back or the underside of the unit.
- Be sure to unplug the power cord from the outlet when the system is not in use for an extended period
of time.
• Connect the AC power cord to the wall socket.
7